Pick-List Variable Tables - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Table 9-17 Network 2: Register Data to Drive Menu (9700)
Parameter
Data To Drive Reg 01
Data To Drive Reg 02
Data To Drive Reg 03 to 64
9.4.4

Pick-list Variable Tables

Table 9-18 Data from Drive Pick-list Variables
Name Manual ID
None None
Man Id None
General Status 2001
Motor Voltage 2100
Total Current 2190
Output Power 2230
Motor Speed 2014
Speed Demand 2060
Speed Reference 2010
NXGPro+ Communication Manual
Function Manual, AA, A5E50226719
ID Unit Default
9701 Fixed Reg Bits
9702 Velocity De‐
mand
9703 to None
9764
Unit Scaling
None None
None None
None None
Volts /1
Amps /1
KW /1
% /10
/1
RPM
/10
Hz
% /100
% /100
9.4 Parameter Asssignment / Addressing
Min Max Description
Register data to drive parameter 1.
Register is not programmable.
Register data to drive parameter 2.
Register is not programmable.
Register data to drive parameters 3 to 64.
Registers are programmable.
16-bit Data Type Notes
None None
None Refer to appendix Internal Drive Net‐
work
Bit Field •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Unsigned
Unsigned
Signed
Unsigned
Unsigned
Unsigned
ControlNet Communication
Bit 0: Fault
Bit 1: Alarm
Bit 2: Running Forward
Bit 3: Running Reverse
Bit 4: Drive Ready
Bit 5: Start/Stop Control From Net‐
work
Bit 6: Speed Reference From Net‐
work
Bit 7: At Speed Reference
Bit 8: Speed In Percent
Bit 9: Speed In RPM
Bit 10: Speed In Hz
Bit 11: Reserved for future use
Bit 12: Reserved for future use
Bit 13: Reserved for future use
Bit 14: Reserved for future use
Bit 15: Reserved for future use
175