Module Status Led 1 - Siemens SINAMICS PERFECT HARMONY GH180 Function Manual

Table 9-2 Module Status LED
LED State
Off
Green
Green, flashing
Red
Red, flashing
1 Item 2 in figure ControlNet Module with Status Indicator Locations
NXGPro+ Communication Manual
Function Manual, AA, A5E50226719
1
Description
No Power
Operating in normal condition, controlled by a scanner in RUN state
Module has not been configured or the scanner is in IDLE state
Unrecoverable fault(s), EXCEPTION, fatal event
Recoverable fault(s) MAC ID has been changed after initialization etc.
ControlNet Communication
9.2 Anybus ControlNet Module
165