Table 6-2
Module Status LED
LED State
Off
Green
Green, flashing
Red
Red, flashing
Item 2 in figure Ethernet/IP Commuication Connector Status Indicator Locations
1
Table 6-3
Link / Activity Status LED
Led State
Off
Green
Green, flickering
Yellow
Yellow, flickering
Items 3 and 4 in figure Ethernet/IP Commuication Connector Status Indicator Locations
1
NXGPro+ Communication Manual
Function Manual, AA, A5E50226719
1
1
Description
No Power
Controlled by a Scanner in Run state
Not configured, or Scanner in Idle state
Major Fault (EXCEPTION state, Fatal error, etc.)
Recoverable fault(s); Module is configured, but stored param‐
eters differ from currently used parameters
Description
No link, no activity
Link (100 Mbit / s) established
Activity (100 Mbit / s)
Link (10 Mbit / s) established
Activity (10 Mbit / s)
Ethernet / IP Communication
6.2 AnyBus Ethernet / IP Module
83