To Access The Tunable Source Screen; Procedure - HP 70427A User Manual

Figure 2-43

Procedure

Getting Started

To Access the Tunable Source Screen

To Access the Tunable Source Screen
Accessing the Tunable Source Screen
Step 1 - Make the tunable source the active module.
Look at the ACT indicator on the HP 70428A Option 002's front panel. If it
is lit, the module is active and can be controlled by the MMS display. If it is
not lit do the following:
1. Press the key.
DISPLAY
2. Press the
NEXT INSTR
indicator lights. If the MMS is connected to more than one module, a
different module will become the active module each time the
softkey is pressed.
INSTR
2-40 HP 70427A/HP 70428A User's Guide
softkey until the HP 70428A Option 002's ACT
NEXT