HP 70427A User Manual page 426

Table 12-5 DOWNCONVERTER COMMANDS (HP 70427A only)
Command
DC:AMN:AMD?
DC:AMN:AMD:MAXL
DC:AMN:AMD:MAXL?
DC:AMN:AMN n
DC:AMN:AMN?
DC:AMPL:AUTO
DC:AMPL:IF:AM n
DC:AMPL:IF:AM?
DC:AMPL:IF:GAIN n
DC:AMPL:IF:GAIN AUTO
DC:AMPL:IF:GAIN?
DC:AMPL:INP:ATT n
DC:AMPL:INP:ATT?
DC:AMPL:INP:ATT AUTO
DC:AMPL:MIX:MAXL n
DC:AMPL:MIX:MAXL?
DC:AMPL:VIEW n
DC:AMPL:VIEW?
Function
Returns AM detector voltage.
Sets AM Detector Max Level
Returns AM Detector Max Level
setting.
Turns AM noise mode to IN and
IF...
IF: n= 0
IN: n= 1
Returns the AM noise mode
setting: 0,1
Triggers one-time amplitude
autorange.
Routes the IF AM detector output...
rear-panel: n= 0
front-panel: n= 1
Returns the IF AM detector output
setting: 0 or 1
Sets IF gain:
n= –10 to +45, in 5 dB steps
Triggers one time IF gain
autorange.
Returns IF gain setting: –10 to +45
Sets input attenuator:
n= 0 to 35, in 5 dB steps
Returns input attenuator setting: 0
to 35
Triggers one-time attenuator
autorange.
Sets mixer maximum level:
n= –5 to +5 in 1 dB steps
Returns mixer maximum level
setting:
– 5.0 to +5.0
Selects the signal to route to the
RF ANALYZER connector...
IF: n= 0
input: n= 1
terminated: n= 2
Returns the view setting: 0,1,2
HP 70427A/HP 70428A User's Guide 12-5
Remote Programming Commands
Equivalent Softkey or
Display
READ AM DET
AM DET MAX LVL
AM Det Max Lvl:
AM NSE IN | IF
AUTO RANGE
IF AM Output
IF GAIN
AUTO IF GAIN
IIF GAIN:
INPUT ATTEN
Atten:
AUTO ATTEN
MIXER MAX LVL
Mixer Max
Level:
VIEW IN | IF | -