HP 70427A User Manual page 93

Getting Started
To Output a Signal with the Tunable Source
Step 5 - Enter the output power
1. Press the
2. Key in the output power with the numeric keypad.
Power levels between 0 and +20 (100 mW), in 0.1 dB steps, can be
entered. But the minimum specified power is shown below.
Also actual resolution can be as much as 0.2 dB.
3. Press the
Figure 2-52 Output Power Softkey Locations
2-48 HP 70427A/HP 70428A User's Guide
softkey.
OUTPUT POWER
•
2.4 to 6.6 GHz:+16
•
6.6 to 25.8 GHz: +10
or softkey to complete the entry.
dBm mW