To Access The Source Screen - HP 70427A User Manual

To Access the Source Screen

Figure 2-28 HP 70428A Front Panel
Step 1 - Make the Source the active module
Look at the ACT indicator on the HP 70428A's front panel. If it is lit, the
module is active and can be controlled by the MMS display. If it is not lit do
the following:
1. Press the
2. Press the
lights. If the MMS display is connected to more than one module, a
different module will become the active module each time the
INSTR
key.
DISPLAY
softkey until the HP 70428A's ACT indicator
NEXT INSTR
softkey is pressed.
HP 70427A/HP 70428A User's Guide 2-27
Getting Started
To Access the Source Screen
NEXT