HP 70427A User Manual page 415

Characteristics
Operating
Considerations
Figure 11-18
Connectors and Indicators (Front- and Rear-Panel)
BUFFERED 10 MHz OUT
BUFFERED 10 MHz OUT
The signal at this connector is the signal at the rear-panel 10 MHz IN
connector after it has been buffered by an amplifier.
•
Output impedance: 50
•
Typical output power: +7 dBm
When the reference chain tuning sensitivity is set to 1.0 ppm/V this output is
switched off.
Reference Chain
11-30 HP 70427A/HP 70428A User's Guide
Ω