Removing The Compute Module End Cap; Removing The Access Panel - HP Synergy 480 Gen9 User Manual

CAUTION:
To prevent damage to electrical components, properly ground the compute module before beginning
any installation procedure. Improper grounding can cause ESD.

Removing the compute module end cap

Procedure
1. Place the compute module on a flat, level work surface.
2. Remove the compute module end cap.

Removing the access panel

Procedure
1. Power down the compute module.
2. Remove the compute module.
3. Place the compute module on a flat, level work surface.
4. Press the access panel release button.
5. Slide the access panel towards the rear of the compute module, and then lift up to remove the panel.
18 Removing the compute module end cap