GE Versana Balance Basic Service Manual page 370

Replacement Procedures
8-4-8-8 Configuration Restore(continued)
NOTE:
NOTE:
8-40 System view
8. After the system is powered on, go to Utility -> System ->
Backup/Restore. Select Patient Archive, User Defined
Configuration and Service under Restore field.
If the user selects Patient Archive, the patient data will be
restored but the exam images might be damaged thus
unable to read.
If the user already restores the detailed User Defined
Configuration in step 6 on 8-37, DO NOT select User
Defined Configuration in this step.
Figure 8-41. Restore Menu
9. Select Restore. Then the following pop-up Warning
message will display, then select OK to continue.
Figure 8-42. Warning Message
Versana Balance – Basic Service Manual
5808768-100 English Rev.9