GE Versana Balance Basic Service Manual page 350

Replacement Procedures
8-4-8-1 Loading the System Software with USB memory stick(continued)
WARNING
NOTE:
NOTE:
NOTE:
NOTE:
8-20 System view
• Load the complete disk: the complete disk will be
loaded. This option is recommended for application
software upgrade.
If selecting Load the complete disk, all existing software and
data will be erased. If backup has not been performed, all data
like Patient Data, System Configuration and User
Configurations (Customer Presets) will be lost. Please ensure
that any patient data on the disk has been backed up before
upgrading the system.
This option is used by service engineer only.
• Load the bootable C: partition only: this option is
intended for recovery of a system that will not boot up.
All patient data is preserved.
While the software installation procedure is designed to
preserve data, select choice Load the bootable C:
partition only to format disk C.
• Only Reload/Upgrade Application Software: the
application software will be loaded/upgraded only. This
option is recommended for application software
upgrade or reload. The software upgrade kit will
automatically detect if the system compatible with this
function and complete upgrading.
If the current system base image does not support the
application version of the upgrade USB disk, a message
will be displayed on the screen and cancelled upgrading
automatically.
5. If Load the complete disk is selected, a confirmation
window will pop out, then select Execute to continue.
Before loading the complete disk, please ensure that any
patient data on the disk has been backed up.
Figure 8-13. Confirmation Window
Versana Balance – Basic Service Manual
5808768-100 English Rev.9