GE Versana Balance Basic Service Manual page 89

3-3-5-2 Position of the Tilt indicator
NOTE:
Versana Balance – Basic Service Manual
5808768-100 English Rev.9
Receiving and unpacking the equipment
The Tilt indicator has been attached to the transportation box as
illustrated in the figure below.
Figure 3-1. Tilt indicator
1. Tilt Indicator
Before cutting the straps, check Tilt Tag to make sure it has not
been triggered. If damaged, report it to the carrier. If not, then
cut the straps around the crate.
System view 3-9