Packing The Equipment - GE Versana Balance Basic Service Manual

System Setup
Step
6 Cut the cable ties around the four wheels.
7 Remove the foams beside the monitor.
8 Remove any additional packing material
surrounding the system.
9 Unlock the wheels, and then hold the control
panel at the front side to move the system until
the front two wheels on the ground and then
slowly move the whole system on the ground.
3-3-6-1 Moving into Position

3-3-7 Packing the Equipment

3-16 System view
Table 3-6: Unpacking the Versana Balance
Description
Please refer to Basic User Manual on how to move the system.
Please pack Versana Balance in the reverse order of unpacking.
Corresponding Graphic
Versana Balance – Basic Service Manual
5808768-100 English Rev.9