Aventics PROFINET-IO Operating Instructions Manual page 106

106 AVENTICS | PROFINET-IO | R412015162–BDL–001–AE
Disassembly and Exchange
Fig. 10: Exchanging the bus coupler, example
1 Hexagonal socket-head screws
2 Left end plate
3 Seal
7. Make all the presettings on the new bus coupler (4)
(see "Making presettings" on page 87).
8. Reestablish the connections.
9. Check the configuration and adjust it if necessary
(see "Configuring the network" on page 94).
4
1
2
5
6
3
3
4 Bus coupler
5 Tie rod
6 Left end plate with connections