Updating The Mobile Application; Replacing And Syncing Devices Using The Mobile Application - Eaton WaveLinx User And Programming Manual

WaveLinx User Manual

Updating the Mobile Application

From time to time, updates may be available for the WaveLinx Mobile Application. Updates will be performed per the user's preference
settings on each mobile device. If not updated automatically, updates may be installed manually from the updates section of the App Store
or Google Play Store.
Replacing and Syncing End Devices using the Mobile Application
If a WaveLinx device is replaced in the system, the mobile application may be used to synch the previous device's settings to the new
device.
To perform the device synch:
Step 1: Install the replacement device per the device's installation instructions.
Step 2: Open the WaveLinx Mobile Application and establish a connection with the Wireless Area Controller as the administrator user.
Step 3: From the WaveLinx Mobile Application, select the menu icon. Tap on the option to enable pairing and then tap on the OK button to
proceed.
Select the menu
icon
Tap on discover
new devices
Tap OK
www.eaton.com/wavelinx
125