Modifying Scene Response - Eaton WaveLinx User And Programming Manual

Modifying Scene Response

The WaveLinx system allows for sixteen programmable scenes per area. These scenes are labeled scene 0 through scene 15. Each scene is
pre-programmed for a light level or ON/OFF response to allow for functionality from occupancy sensors and wallstations once devices have
been PAIRED in the construction group or assigned to an area.
Default Scene Response
Scene
Scene 0
Scene 1
Scene 2
Scene 3
Scene 4
Scene 5
Scene 6
Scene 7 through 15
The scene defaults can be modified to respond in a different manner. Be aware that multiple devices in the space may use the same scene
number (wallstation buttons, occupancy sensor commands, and schedule events). Modification of the scene levels will result in a changed
response for all devices that use that scene.
To change the scene response:
Step 1: Open the WaveLinx Mobile Application and establish a connection with the Wireless Area Controller as the administrator user.
Step 2: In the areas list, select the area that contains the scenes to be modified.
40
www.eaton.com/wavelinx
Dimmable Light Zone Response
0%
100%
70%
50%
30%
10%
1%
0%
Non-Dimmable (ON/OFF)
Zone Response
OFF (0%)
ON (100%)
ON (100%)
ON (100%)
ON (100%)
ON (100%)
ON (100%)
OFF (0%)
WaveLinx User Manual
Receptacle Zone Response
OFF
ON
ON
ON
ON
ON
ON
OFF