Renaming the Wireless Area Controller
Each Wireless Area Controller has a default name that will appear in the WaveLinx Mobile Application. It is possible to change this name
through the internal webpages.
To change the Wireless Area Controller default name:
Step 1: Establish a connection from the computer and the Wireless Area Controller as the administrator user.
Step 2: In the system page, locate the Wireless Area Controller name field and type in the desired name. Select the set name button to save
the change. The system will display a success message at the top of the screen to acknowledge the change. The new name will display in
the WaveLinx Mobile Application.
Verify success
Performing a System Backup
Perform system backups regularly. The system should be backed up:
Once the system is initially running and operational
•
Before making significant changes
•
Before updating Wireless Area Controller or device firmware (suggested)
•
After updating Wireless Area Controller or device firmware (suggested)
•
The system may be restored from the backup if programmed changes do not operate as intended or if replacing the Wireless Area Controller
in the event of a controller failure.
To create a backup:
Step 1: Establish a connection from the computer and the Wireless Area Controller as the administrator user.
Step 2: In the system page, scroll down the screen, and then select the option to create and download backup file.
112
www.eaton.com/wavelinx
Type desired wireless
area controller name
The new name will be
displayed in the mobile
application
Select the set name option
WaveLinx User Manual