Step 3: Connecting To The Mobile Application As The Administrator User - Eaton WaveLinx User And Programming Manual

Quick Links for Common Questions
Pairing mode timed out before I was done adding my battery powered ceiling sensors or before I confirmed my devices paired properly.
•
What should I do? See the answer on page 133.
One or more of my devices did not pair. What should I do? See the answer on page 133.
•
I have more than one Wireless Area Controller in my facility. A device or multiple devices paired with the wrong controller.
•
How do I resolve this? See the answer on page 133.
My device is showing paired behavior but it is not paired with the correct controller. I am unable to find what controller it has paired with.
•
How do I remove its pairing to start over? See the answer on page 134.
I installed a new device after I completed the initial construction pairing. How do I pair the new device into the existing group?
•
See the answer on page 137 .
A device was not powered during the pairing process and did not successfully pair with the Wireless Area Controller.
•
How do I get it to join the construction group? See the answer on page 137 .
What will my devices do if they lose communication with the Wireless Area Controller? See the answer on page 140.
•

Step 3: Connecting to the Mobile Application as the Administrator User

Once construction grouping is complete, the WaveLinx Mobile Application will be used to administer the system. This section describes how
an administrator user connects to the Wireless Area Controller from the WaveLinx Mobile Application.
The procedures in this section assume that the Wireless Area Controller is powered up, is still in its factory default state for network settings
and is not connected to the facility's network. Refer to the site's network administrator for access details if the default settings or network
configuration have been modified.
For security purposes, after the initial configuration is complete, change the default password. Users should set a complex password when changing
N ote:
passwords. See "Modifying Existing User Accounts and Passwords" on page 105 for this procedure.
1: Download the latest version of the WaveLinx Mobile Application from Google Play™ or the App Store® and install it on a smartphone or
tablet. The WaveLinx Mobile Application is compatible with devices running iOS 11+ or Android™ 7+ operating systems.
2: If there is more than one Wireless Area Controller in the facility, go to the first Wireless Area Controller location. On the front plate of the
controller below the blue Eaton LED, locate the label with the MAC ID. Make note of the MAC ID shown.
18
www.eaton.com/wavelinx
WaveLinx User Manual