Table of Contents
Advertisement
Additional Wallstation Information
There are some helpful items available in the mobile application to assist with wallstation identification and battery monitoring.
Blink to Identify
•
In an area that has a large quantity of the same model of standard line voltage powered wallstations, use the mobile application's blink
to identify feather to identify which wallstation is which. If this is activated, the designated wallstation will flash its LEDs for a period of
approximately 10 to 15 seconds allowing for easy identification.
N
ote:
Battery powered wallstations do not offer this feature. It is recommended that a descriptive name be assigned to these devices when they are first
assigned to an area to allow for easy identification.
Battery icon
•
Battery powered wallstations will show an indication of the current battery status. The icon will be green if the battery voltage measures
full, yellow if measuring partial voltage and blink red when at an extremely low voltage indicating that the batteries need to be changed.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
56
www.eaton.com/wavelinx
Blink to identify
View current battery status:
• Green – battery full
• Yellow – battery partial
• Red – battery low
WaveLinx User Manual
Advertisement
Table of Contents
