Table of Contents
Advertisement
WaveLinx User Manual
Updating the Firmware/Software of the Wireless Area Controller
To perform an update to the Wireless Area Controller firmware/software:
Step 1: Download the firmware file from Eaton's connected building portal, mycb.eaton.com and save it to the computer being used to
perform the update. If the file is in a .zip format, unzip the files to a known location. The filename should appear as otaUgrade.tgz.
When creating the folder to store the file, type the firmware version in the folder name to easily distinguish the latest release from previous releases.
N
ote:
Step 2: Establish a connection from the computer and the Wireless Area Controller as the administrator user.
Step 3: If not done previously, turn off the browser popup blocker for this website and then create a backup of the current programming.
Step 4: In the firmware page, select the browse button in the update package section. Locate the otaUpgrade.tgz firmware file saved on the
computer, and then click on the upload button.
Upgrade file
Create a backup
Browse to the
upgrade file location
Select the
upload button
www.eaton.com/wavelinx
117
Advertisement
Table of Contents
