Step 4: Organizing Devices Into Controlled Areas And Zones - Eaton WaveLinx User And Programming Manual

WaveLinx User Manual

Step 4: Organizing Devices into Controlled Areas and Zones

Once the communication between the WaveLinx Mobile Application and the Wireless Area Controller is established, the organization of the
system begins. In this section, the mobile application will be used to identify and group devices into unique areas and zones for automatic
code commissioning operation.
1: Go to the location in the facility that will be programmed first. Open the WaveLinx Mobile Application and establish an administrator
connection with the Wireless Area Controller. Once successfully connected, create a new area in the area list by tapping the + button on the
right side of the screen.
Tap the plus icon to
create new area
2: Enter a descriptive name for the area and select the desired default fade time behavior for how quickly light levels adjust with received
commands. Tap on save to advance into the new area's configuration screen.
Enter a descriptive
area name
Select desired default
fade times
Tap save to advance
the screen
www.eaton.com/wavelinx
27