Changing Wi-Fi Settings - Eaton WaveLinx User And Programming Manual

Changing Wi-Fi Settings

The Wireless Area Controller may be connected to the facility's building WLAN for wireless communications. If the Wireless Area Controller
is to be used in this manner, in the network page, enter the desired WLAN SSID, the authentication and encryption methods used by the
WLAN, and the password information that has been provided by the network administrator. It is also possible to set the Wi-Fi to disconnect
mode, removing the Wi-Fi settings from the WAC so that it will not reconnect to the Wi-Fi network after reboot or lost connection.
122
www.eaton.com/wavelinx
Network page
Network page
Enter wireless access
point details
Select update
WaveLinx User Manual
Reboot for changes
to take effect
Enter wireless
connection details