Changing Ethernet Settings; Changing Dns Settings; Custom Certificates - Eaton WaveLinx User And Programming Manual

WaveLinx User Manual

Changing Ethernet Settings

If the Wireless Area Controller is installed into the facility's building LAN, by default, it is set for obtaining an IP address automatically
through DHCP . It is possible to assign a static IP by changing the selection to use a defined IP address, and then typing in the desired IP
address, subnet mask and default gateway.
Select DHCP to obtain
the IP automatically

Changing DNS Settings

If not using DHCP , it is possible to hardcode the domain name server settings into the WAC by typing in the IP addresses of the desired
domain name servers. For non-public domain name servers, use a manual name server entry.
Select DHCP to obtain
the IP automatically

Custom Certificates

WaveLinx uses Eaton provided default SSL certificates that are installed with the system to certify Wireless Area Controller communication
to mobile devices and computers. The provision has been made to allow for future support of other custom certificates. This custom
certification option feature is not currently operational and should not be used without discussion with Eaton's technical support team.
Network page
Network page
Define a static IP if desired
Enter the IP address of
the name server(s) if
not using DHCP
www.eaton.com/wavelinx
123