Table of Contents
Advertisement
The internal webpage will open and display the system page.
Successful log in displays
the system page
Setting the System Location, Time, Date and Time Zone
To ensure schedule event accuracy, set the location, time, date, and time zone in the controller. The location is used for astronomic clock
sunset and sunrise times. These settings are found within the system webpage. In event of a power loss, the time and date will be retained
for up to 48 hours. If power is lost longer than a 48 hour period, the settings will need to be refreshed once power is restored.
To set the location, time, date and time zone:
Step 1: Establish a connection from the computer and the Wireless Area Controller as the administrator user.
Step 2: First set the location. There are two methods of setting the location, either using the auto location feature or by manually entering
the coordinates.
Method 1: If the computer or device being used to connect to the Wireless Area Controller is connected to a network that allows for GPS
location, for best accuracy use the auto location method. Select the option to use auto location, and then select to auto detect the location.
Accept any popup messages to allow access to the GPS location. A success message will be displayed stating that the location information
is successfully uploaded. Click on the use manual location option to view the currently set coordinates.
102
www.eaton.com/wavelinx
Enter the administrator
username and password
WaveLinx User Manual
Advertisement
Table of Contents
