Adding A New User Account - Eaton WaveLinx User And Programming Manual

Step 3: Make the necessary changes to the role, username or password. If changing the password, the password must be between 8 and
16 characters and must contain at least 1 upper case letter, 1 number and 1 special character. The special characters that may be used are
"#$'()*,-./:;<=>?@[]^_`{|}~. Once the information is correct, select the edit user button to save the changes.
Select edit user to save
The WclDr and WclWeb users listed are not used in typical applications.
N ote:

Adding a New User Account

Up to 99 user accounts may exist in the Wireless Area Controller. To create a new user account:
Step 1: Establish a connection from the computer and the Wireless Area Controller as the system administrator user.
Step 2: In the accounts page, select the option to add a user.
106
www.eaton.com/wavelinx
Select either Admin or Tenant role
Type in a new user name
Type existing and then
new password, confirming
the new password
Select user to change
Accounts page
WaveLinx User Manual
Verify success message
at the top of the
accounts page