Set Communication - ADF Web HD67626-A1 User Manual

Industrial Electronic Devices

SET COMMUNICATION:

This section define the fundamental communication parameters of two buses, SNMP and S7comm.
By Pressing the "Set Communication" button from the main window for SW67626 (Fig. 2) the
window "Set Communication" appears (Fig. 3).
The means of the fields for "Ethernet Connection" are:
In the field "Device Name
defined;
If the field "Obtain an IP Address Automatically (DHCP for Cable
checked, DHCP for LAN connection is enabled;
If the field "Enable DNS" is checked, DNS protocol is enabled;
In the field "Primary DNS" the IP Address of the primary DNS server is defined;
In the field "Secondary
The means of the fields for "S7comm" are:
In the fields "IP ADDRESS" the IP address for S7comm side of the converter is defined;
In the fields "SUBNET
defined;
In the fields "GATEWAY" the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of the
net.
The means of the fields for "SNMP Agents" are:
In the field "IP ADDRESS" the IP address of SNMP side of the converter is defined;
In the field "SUBNET Mask" the SubNet Mask of SNMP side of the converter is defined;
In the field "GATEWAY" the default gateway of the network is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of the
net;
In the field "SNMP Name of
In the field "Contact" the contact for SNMP Agent station is defined;
ADFweb.com Srl – IT31010 – Mareno – Treviso
(Hostname)" the Hostname to assign to the converter is
DNS" the IP Address of the secondary DNS server is defined.
Mask" the SubNet Mask for S7comm side of the converter is
Station" the name for SNMP Agent station is defined;
User Manual S7comm / SNMP Agent
Document code: MN67626_ENG Revision 1.000
Connection)" is
Figure 3: "Set Communication" window
INFO: www.adfweb.com
Page 15 of 27
Phone +39.0438.30.91.31