Table of Contents
Advertisement
Industrial Electronic Devices
The data of the columns in the
"SNMP Write" have the following
meanings:
If
the
field
"Enable"
checked, the SNMP OID is
enabled;
In
the
field
"Community
Name" the name
of
Community is defined;
In the field "Type" the type
of data of the OID is defined
(Octet String or Integer);
In the field "Position" the starting byte of the internal memory array where mapping the data is defined;
In the field
"Start
Bit" the starting bit of the selected Position is defined;
In the field
"Num
Bits/Bytes" the dimension of the OID is defined. For 'Int' type the dimension is in bit, for 'String' type the
dimension is in bytes;
In the field "Description" the description/name of the OID is defined;
In the field "Conversion" it is possible to select the data conversion to apply to the data;
In the field "Mnemonic" a brief description of the OID is defined.
Note:
If the fields "On Change" and "On Timer" are disabled, the OID is readable using standard GET command. If one of these fields is
enabled, the OID is sent as Trap and it is readable by GET command too.
Note:
The field "Description" must start with lowercase letter and it cannot contain special chars (just letters and numbers). All the
"Description" fields must be different between them.
SNMP MIB:
By pressing the
"SNMP
MIB" button it is possible to save the MIB file for the SNMP Manager.
ADFweb.com Srl – IT31010 – Mareno – Treviso
is
the
Figure 5b: "Set SNMP Access -> SNMP Write" window
Figure 5b: "Set SNMP Access -> SNMP Write" window
User Manual S7comm / SNMP Agent
Document code: MN67626_ENG
Revision 1.000
INFO:
www.adfweb.com
Page 21 of 27
Phone +39.0438.30.91.31
Advertisement
Table of Contents
