Set Snmp Access - ADF Web HD67626-A1 User Manual

S7comm / snmp agent
Table of Contents

Advertisement

Industrial Electronic Devices

SET SNMP ACCESS:

By pressing the
"Set SNMP
Access" button from the main window for SW67626 (Fig. 2) the "Set SNMP Access" window appears (Fig. 5). In
this section, it is possible to create the OIDs for SNMP side to read or write using GET and SET commands or to be sent as TRAP messages.
The window is divided into two tables, one for SNMP readings and one for SNMP writings.
The data of the columns in the "SNMP
Read" have the following meanings:
If
the
field
"Enable"
checked, the SNMP OID is
enabled;
In
the
field
"Community
Name"
the
name
Community is defined;
In the field "Type" the type of
data of the OID is defined
(Octet String or Integer);
If the field
"On
Change" is checked, the OID is sent as Trap when the data from S7comm side change;
If the field
"On
CMD" is checked, the OID is sent as Trap when the a S7comm response is received;
If the field
"On
Timer" is checked, the OID is sent as Trap cyclically;
In the field
"Time
(ms)" the delay time for the Trap send is defined (if "On Timer" option is checked);
In the field "Position" the starting byte of the internal memory array where taking the data is defined;
In the field
"Start
Bit" the starting bit of the selected Position is defined;
In the field
"Num
Bits/Bytes" the dimension of the OID is defined. For 'Int' type the dimension is in bit, for 'String' type the
dimension is in bytes;
In the field "Description" the description/name of the OID is defined;
In the field
"IP
Address" the IP Address of the SNMP device where addressing the Trap message is defined. This field is used only
when 'On Change' or 'On Timer' option is checked;
In the field "Conversion" it is possible to select the data conversion to apply to the data;
In the field "Mnemonic" a brief description of the OID is defined.
ADFweb.com Srl – IT31010 – Mareno – Treviso
is
of
the
Figure 5a: "Set SNMP Access -> SNMP Read" window
User Manual S7comm / SNMP Agent
Document code: MN67626_ENG
Revision 1.000
INFO:
www.adfweb.com
Page 20 of 27
Phone +39.0438.30.91.31

Advertisement

Table of Contents
loading

Table of Contents