Turbofiller - Hardi COMMANDER DELTA FORCE Instruction Book

3 - Description

TurboFiller

The TurboFiller is where you add the chemicals to be mixed with
water in the main tank.
Before use
• Pull the handle (white arrow) to unlock.
• Grab the handle to pull the TurboFiller down, until it clicks into
locked position.
After use
• Grab the handle to push TurboFiller back in storing position, until
it locks.
±
WARNING! Before releasing the lock, always keep a hand on the
grip to avoid abrupt movement of the TurboFiller!
The TurboFiller valves and rinsing lever are placed on the backside (black
arrow).
TurboFiller Suction Valve
The valve is used simultaneously with the TurboFiller. The valve has 2
settings: Continuously open or spring loaded normally closed. Open the
valve when chemicals are to be filled into the TurboFiller and transferred
to main tank.
Suction from TurboFiller
TurboDeflector Valve
This TurboDeflector valve activates the vortex flushing of the TurboFiller.
Lift the lever to lock it in open position for continuous liquid rotation in
the hopper.
Start TurboDeflector
Chemical Container Rinsing Lever
The upper lever is used for two purposes.
When the TurboFiller lid is open:
For rinsing empty containers. Place the container over the rotating
flushing nozzle in the middle of the TurboFiller to rinse the inside of the
container.
When the TurboFiller lid is closed:
Use the Chemical Container Rinsing lever to rinse the hopper, when the
filling of chemicals is completed.
Chemical Container Rinsing
52