5 - Operation
±
WARNING! It is the responsibility of the sprayer operator or owner, that the sprayer is cleaned sufficiently to prevent
contamination of the environment, crop damages and health and safety hazards to the operator and the public.
HARDI cannot be held responsible for any damages or incidents related to insufficient cleaning.
μ
ATTENTION! The rinsing nozzles cannot always guarantee a 100% cleaning of the tank. Clean manually with a high
pressure cleaner afterwards, especially if crops sensitive to the chemical just sprayed are going to be sprayed
afterwards!
PrimeFlow - Manual Cleaning
In the event of an AutoWash failure, sprayers equipped with PrimeFlow can follow the same manual washing procedure as
described in this book, when the following detail is observed:
• Open all nozzles before flushing the spray lines. This is to prevent chemical residues from the boom lines are returned
into the main tank.
108