Hours Service - Check/Adjust Drawbar; Hours Service - Check/Tighten Steering; Hours Service - Retightening The Spray Boom - Hardi COMMANDER DELTA FORCE Instruction Book

100 Hours Service - Check/Adjust Drawbar

÷
NOTE! This adjustment is only valid for fixed drawbar.
If too many movements occur sideways, the drawbar must be adjusted.
1. Loosen counternuts (B).
2. Regulate on the turnbuckles (A) on each side to adjust and center
the drawbar.
3. Tighten counternuts (B).

100 Hours Service - Check/Tighten Steering

If too much play is found in the steering section it must be retightened.
This applies to both steering and non-steering versions. Retighten the
nuts on both sides to the specified torque.
μ
ATTENTION! Specified torque is 250 Nm.
Be sure that the split pin is fitted (or refitted if dismounted) at the end of
the big bolts.

100 Hours Service - Retightening the Spray Boom

Due to several movements of the spray boom from driving in the field with an unfolded boom, you must retighten all bolted
connections on the boom centre and boom wings.
Where you find bolts with Nord-Lock washers, please tighten with the
following torques.
Bolt size Torque (Nm)
M10 50
M12 85
M14 136
M16 208
M18 291
M20 408
M22 557
M24 703
M27 1028
M30 1401
6 - Maintenance
125