Agitation Valve = Green Symbols; Turbofiller = Yellow Symbols - Hardi ALPHA evo ALU-TWIN FORCE Instruction Book

Agitation valve = green symbols

With the adjustable agitation valve it is possible to combine spraying with a low volume rate at high pressure with agitation
at the same time. This is continuously controlled by the agitation valve.
The valve is marked with an arrow on the disc, which indicates the amount of liquid that passes through the valve. If the
valve handle is turned to the right, there is less agitation in the tank. Conversely if the handle is turned to the left, the volume
is higher and there is maximum agitation in the tank.
Adjustable
agitation

TurboFiller = yellow symbols

The filler is situated in the working zone on the sprayer's left side. To use
it, lift the handle fig. 1 gently and pull it to drop the TurboFiller to the
lower position.
After use, raise the TurboFiller to its high position again, making sure that
it locks.
Mixing the
liquid
±
WARNING! The handle should be held all the time while the TurboFiller is being lowered.
External
cleaning
Rinsing the
TurboFiller
3 - Description
1
2
Rinsing the
containers
17