Hardi Commander Plus SPC Series Instruction Book
  1. Manuals
  2. Brands
  3. Hardi Manuals
  4. Farm Equipment
  5. Commander Plus SPC Series
  6. Instruction book
Hardi Commander Plus SPC Series Instruction Book

Hardi Commander Plus SPC Series Instruction Book

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
We congratulate you for choosing a HARDI plant protection product. The reliability
and efficiency of this product depend upon your care. The first step is to carefully
read and pay attention to this instruction book. It contains essential information on the
efficient use and long life of this quality product.
As this instruction book covers all COMMANDER Plus SPB models and all
COMMANDER Plus SPC models, please pay attention to the paragraphs dealing with
precisely your model.
This book is to be read in conjunction with the „Spray Technique“ book.
More information about the COMMANDER Plus can be found on the product’s own
website at: http//www.commander-plus.com
Illustrations, technical information and data in this book are to the best of our belief correct at the time of printing. As
it is HARDI INTERNATIONAL A/S policy permanently to improve our products, we reserve the right to make
changes in design, features, accessories, specifications and maintenance instructions at any time and without
notice. HARDI INTERNATIONAL A/S is without any obligation in relation to implements purchased before or after
such changes.
HARDI INTERNATIONAL A/S cannot undertake any responsibility for possible omissions or inaccuracies in this
publication, although everything possible has been done to make it complete and correct.
As this instruction book covers more models and features or equipment, which are available in certain countries
only, please pay attention to paragraphs dealing with precisely your model.
Published and printed by HARDI INTERNATIONAL A/S
COMMANDER
SPB/SPC
Instruction book
670828-GB-2002/04
GB 01 04 05
1

Advertisement

Table of Contents
loading

Related Manuals for Hardi Commander Plus SPC Series

Summary of Contents for Hardi Commander Plus SPC Series

  • Page 1 Illustrations, technical information and data in this book are to the best of our belief correct at the time of printing. As it is HARDI INTERNATIONAL A/S policy permanently to improve our products, we reserve the right to make changes in design, features, accessories, specifications and maintenance instructions at any time and without notice.

  • Page 3: Table Of Contents

    Operating ..................45 Hydraulics - joystick handle (type Z only) ........18 By-pass ..................45 Installation of handle ..............18 HARDI CIRCULATION SYSTEM ............46 Installation of control box ............. 19 Description ..................46 Control box - EVC operating unit ..........19 Function ..................

  • Page 4: Declaration Of Conformity

    Conf Conformity ormity ormity Manufacturer, Importer, HARDI INTERNATIONAL A/S Helgeshøj Allé 38 DK 2630 Taastrup DENMARK declare that the following product; _________________________________________________________________________________________ A. was manufactured in conformity with the provisions in the COUNCIL DIRECTIVE of 14 June 1989 on mutual...

  • Page 5: Operator Safety

    If any portion of this instruction book remains unclear Note the following recommended precautions and safe after reading it, contact your HARDI dealer for further operating practices. explanation before using the equipment. Read and understand this instruction book before using the equipment.

  • Page 6: Commander Plus

    Support leg ladder Suspension Pump Hydraulic and electric components Crop Protection Kit P.T.O. shaft Boom and Work lights HARDI FILLER Lockers for pesticide containers and equip- ment Please note that some of the features are optional equipment GB 04 04 04...
  • Page 7 The operating unit is constructed of modules and is electrically controlled via a remote control box. The built-in HARDI-MATIC ensures a constant volume per hectare of the liquid (l/ha) at varying forward speed within the same gear when the number of P.T.O. revolu- tions are between 300-600 r.p.m.

  • Page 8: Sprayer Use

    The HARDI COMMANDER sprayer is for the application oper oper tion tion of crop protection chemicals and liquid fertilisers. Although the sprayer has been applied with a strong and protective surface treatment on steel parts, bolts etc.

  • Page 9: Connecting The Sprayer

    Sprayer setup Connecting the spr Connecting the spr Connecting the spra a a a a y y y y y er er er er er Connecting the spr Connecting the spr Mounting the drawbar extension The extension piece is inserted into Dra a a a a wbar wbar wbar...

  • Page 10: Fixed Drawbar

    Sprayer setup F F F F F ix ix ix ix ixed dr ed dr ed dr ed dr ed dra a a a a wbar wbar wbar wbar wbar Make sure the drawbar points straight ahead from its position on the trailer. If not, the two turn buckles A can be adjusted till the drawbar is centred.

  • Page 11: Transmission Shaft

    Sprayer setup T T T T T r r r r r ansmission shaft ansmission shaft ansmission shaft ansmission shaft ansmission shaft Oper Oper Oper Oper Opera a a a a tor saf tor saf tor saf tor safety tor saf To avoid accidents and personal injuries, note the following recommended precautions and safe operation practices.
  • Page 12 Sprayer setup 7. Fit the chains to prevent the protection guards from rotating with the shaft. T259-0008 8. To ensure long life of the transmission shaft, try to avoid working angles greater than 15°. T259-0009 GB 05 03 01...

  • Page 13: Track Gauge

    Sprayer setup T T T T T r r r r r ac auge e e e e ack g k gaug Altering the tr Altering the tr Altering the tr Altering the tr Altering the trac ack g k gaug auge e e e e The track gauge of the COMMANDER can be altered stepless as follows,...

  • Page 14: Adjustment Ranges - Track Width

    Sprayer setup Adjustment r Adjustment r Adjustment r Adjustment r Adjustment rang anges - tr es - tr es - tr es - tr es - trac ack width k width k width k width k width The maximum track width for all models is 2250 mm. The minimum track width depends on the parameters in the charts beneath and whether the sprayer is equipped with suspended axle - or not.
  • Page 15 Sprayer setup Track width - Sprayers with suspension HÃyˆ†Ã!! ’…rÆv“r ($ÑÃ##Å ($ÑÃ#'Å !ÑÃ##Å !ÑÃ#'Å !#ÑÃ#%Å '#ÑÃ"'Å !'ÑÃ"'Å Sprayer with: AyhtrÃuˆi 1800 2250 1800 2250 1800 2250 1800 2250 1800 2250 2020 2250 2060 2250 Hˆqtˆh…q† 1800 2250 1800 2250 1800 2250 1800 2250 1800 2250 2020 2250 2060 2250 HÃyˆ†Ã!' ’…rÆv“r ($ÑÃ##Å...

  • Page 16: Turning Rim And Rim Plate

    Sprayer setup T T T T T urning rim and rim pla urning rim and rim pla urning rim and rim pla urning rim and rim pla urning rim and rim plate te te te te Track gauge can be altered by turning rim and rim plate, positions refered to as ‘+’...

  • Page 17: Extension Kit For Centre Section

    Sprayer setup Extension k Extension k Extension k Extension k Extension kit f it f it f it f it for centr or centr or centr or centr or centre section e section e section e section e section Suspension (SPC only) Suspension (SPC only) Suspension (SPC only) Suspension (SPC only)

  • Page 18: Hydraulic Systems

    • One double acting outlet for the folding function Try to hook-up the handle as close as possible to the battery power supply. HARDI recommends using an Ensure that snap couplers are clean before connection! electric distribution box (ref. no. 817925) to ensure a good power supply to various 12V attachments.

  • Page 19: Installation Of Control Box

    1. Connect the plug A to the tractor’s 12V power system. be used for mounting. Try to hook-up the handle as close as possible to the battery power supply. HARDI recommends using an electric distribution box (ref. no. 817925) to ensure a good power supply to various 12V attachments.

  • Page 20: Brakes

    Sprayer setup Brak akes Tractor Trailer Emer Emer Emer Emer Emerg g g g g enc ency and par y and par y and par y and par y and park k k k k ing br ing br ing br ing br ing brak ake (if...

  • Page 21: Single-Line Brakes (If Fitted)

    Sprayer setup Sing Sing Sing Sing Single-line br le-line br le-line br le-line br le-line brak akes (if es (if es (if es (if f f f f fitted) es (if itted) itted) itted) itted) Flip the snap coupler protection flap away and connect the brake system snap coupler to the tractor outlet (black) and let the compressor fill the sprayer’s air reservoir.

  • Page 22: Counter Weight (Tracker Models Only)

    Sprayer setup Counter w Counter w Counter weight eight eight eight Counter w Counter w eight Recommended tyre pressure: (TRA (TRA CKER models only) CKER models only) (TRA (TRA (TRACKER models only) CKER models only) CKER models only) To improve stability on TRACKER models, extra weight can be added by means of liquid-filled tyres.

  • Page 23: Transport

    Sprayer setup T T T T T r r r r r anspor anspor ansport t t t t anspor anspor T T T T T r r r r r anspor anspor anspor anspor ansport br t br t br t br t brac ack k k k k ets...

  • Page 24: Adjusting Boom Transport Position

    Sprayer setup T T T T T r r r r r anspor anspor anspor anspor ansport loc t loc t loc t loc t lock k k k k Adjusting boom tr Adjusting boom tr Adjusting boom tr Adjusting boom tr Adjusting boom transpor anspor anspor...

  • Page 25: Driving Technique

    STEER TRA STEER TRA (certain models only) decreased stability when turning, especially when turning (If the sprayer is equipped with HARDI NOVA, please on hillsides. see separate instruction book). To avoid overbalancing, pay attention to these guide- The articulating drawbar on STEER TRACK is to be lines: operated manually via the D.A.H.

  • Page 26: Self Track

    Sprayer setup SELF TRA SELF TRA SELF TRA SELF TRA SELF TRACK The SELF TRACK is always in tracking mode. The SELF TRACK drawbar will always articulate when the tractor is turning and follow the tractor rear wheels. The SELF TRACK drawbar is hydraulically damped to obtain stable trailing.

  • Page 27: Equipment - Standard And Additional

    The locker B can be mounted next to the HARDI FILLER. If necessary, grease the slide bars to make the ladder It is for the purpose of storing pesticide containers in slide smoother. use, nozzles, calibration- and compound equipment. The locker is fitted to a mounting A, which is bolted to the frame of the trailer.

  • Page 28: Boom And Work Lights (If Fitted)

    The work light lamp B is also mounted to the railing of Two compartments the platform above the MANIFOLD valves. This lamp is positioned to lighten the HARDI FILLER + the MANI- FOLD system. It is recommended to switch of the rear lights of the tractor in order to save power consumption and to avoid reflection.

  • Page 29: Crop Protection Kit (If Fitted)

    Sprayer setup Each cutout in the shield is then fastened with a match- ing locking device, which are mounted along the lower part of the sprayer. Drag the split, twist it 90 and drop the split again to lock it T066-0074 T060-0123 Strawdividers...

  • Page 30: Mudguards (If Fitted)

    Sprayer setup Mudguar Mudguar Mudguar Mudguar Mudguards (if ds (if ds (if ds (if f f f f fitted) ds (if itted) itted) itted) itted) T060-0127 Mudguards can be fitted on the trailer wheels by means of a supporting frame which is bolted to a mounting on the wheel axle.

  • Page 31: Disconnecting The Sprayer

    Sprayer setup Disconnecting the spr Disconnecting the spr Disconnecting the spra a a a a y y y y y er er er er er Disconnecting the spr Disconnecting the spr Transmission shaft support The transmission shaft rests on the bracket A when not Always clean the sprayer - inside and outside - before in use (Low hitch models).

  • Page 32: Operating The Boom

    Operation Oper Oper Opera a a a a ting the boom ting the boom ting the boom Oper Oper ting the boom ting the boom Unfolding and f olding and f olding and f olding and folding the SPB-Y and olding and f olding the SPB-Y and olding the SPB-Y and...

  • Page 33: Unfolding And Folding The Spb-Z And Spc-Z Boom

    Operation Unfolding and f olding and f olding and f olding and folding the SPB-Z and olding and f olding the SPB-Z and olding the SPB-Z and olding the SPB-Z and olding the SPB-Z and Hydraulic control box SPC-Z boom SPC-Z boom SPC-Z boom SPC-Z boom...

  • Page 34: Operating The Liquid System

    4. Pressure manifold (green) 5. Agitation following rules of thumb: 6. Without agitation (pressure equalisation) 7. HARDI MATIC 1. Choose “Without Agitation” if a high level of 8. Return line (Self-cleaning filter) effervescence occurs in order to reduce the 9. Self-Cleaning Filter amount of foam.

  • Page 35: Electrical Operated Manifold Valves (If Fitted)

    Operation F F F F F illing of illing of illing of illing of w w w w wa a a a a ter illing of Water can be filled into the main tank in five ways: Closed The disc has two 1.
  • Page 36 Operation 2. Suction Filling Device (if fitted) only to fill from closed reservoirs (mobile water tanks etc.) to avoid contamination. WARNING! Avoid contamination or personal WARNING! If suction hose/filter is carried on the injury. Do not open suction valve towards sprayer during spraying, it can be contaminated Suction Filling Device unless pump is running by spray drift which will be transferred to lake/river...

  • Page 37: Filling Of Rinsing Tank (If Fitted)

    Operation 4. Filling device and Fast filling device 5. Depending on the chemical in question, the Pressure Manifold can be set on “Agitation”. If no agitation is used simultaneously needed, this valve must be closed. 6. Engage the P.T.O. and start the pump. The Filling Device and the Fast Filling Device can be used simultaneously - this gives even bigger filling WARNING! Do not leave the sprayer whilst...

  • Page 38: Filling Of Clean Water Tank

    Operation Adjustment of Adjustment of C oper C opera a a a a ting unit C oper ting unit ting unit F F F F F illing of illing of illing of illing of illing of c c c c clean w lean w lean w lean wa a a a a ter tank...

  • Page 39: Filters

    Operation F F F F F ilter ilter ilter ilters s s s s NOTE! HEREAFTER ADJUSTMENT OF PRESSURE ilter EQUALISATION WILL ONLY BE NEEDED WHEN: All filters should always be used, and their function checked regularly. The mesh size of the filter in use 1.

  • Page 40: Filling Of Chemicals

    Chemicals can be filled in the tank in two ways: To get access to the HARDI FILLER, grab the handle 1. Through tank lid. and drag the HARDI FILLER the whole way down. Due 2. By means of HARDI FILLER chemical filling device.
  • Page 41 Operation Turn green valve towards “HARDI FILLER and the other green valve towards agitation. Close remaining valves. 3. Check that bottom valve A at the FILLER is closed. Black Green Green Green Black Green Green Green Filling of Powder chemicals 1.

  • Page 42: Use Of Rinsing Tank And Rinsing Nozzles (If Fitted)

    Operation Use of rinsing tank and rinsing Use of rinsing tank and rinsing IMPORTANT! The hopper rinsing device is using spray Use of rinsing tank and rinsing Use of rinsing tank and rinsing Use of rinsing tank and rinsing liquid to rinse the hopper for concentrated chemical. The nozzles (if nozzles (if nozzles (if f f f f fitted)

  • Page 43: Technical Residue

    Operation aining a r aining a r esidue esidue with clean water. Draining a r aining a r aining a residue esidue esidue 5. Disengage pump again. Using the dr Using the dr Using the drain v Using the dr Using the dr ain v ain v...

  • Page 44: Rinsing Tank

    Operation ety pr ety pr ecautions ecautions Rinsing tank Rinsing tank Rinsing tank Rinsing tank Rinsing tank Safety pr ety pr ety precautions ecautions ecautions To avoid algae developing in the rinsing tank always drain the rinsing tank when the sprayer is not in use for a Always be careful when working with crop long period.

  • Page 45: Adjustable Agitation Valve

    STEM STEM STEM STEM existing agitation valve at your Hardi Manifold System. See instruction book for information about selecting It gives you the possibility to continiously adjust the optional equipment quantity of liquid that is used for agitation or by-pass.

  • Page 46: Hardi Circulation System

    High Capacity Fluid System (HCFS). The operation of the liquid system is identical for both systems. At a sprayer with HARDI CIRCULATION SYSTEM, an extra valve connected with a circulation suction filter is added to the MANIFOLD system. The valve and filter are fitted to the right side of the MANIFOLD valves. This valve has three positions: circulation from main tank, circulation from rinse tank or circulation off (see signs on valve).

  • Page 47: Operating

    HARDI sprayers. 6. Start spraying. Spray water from rinsing tank in the HARDI CIRCULATION SYSTEM has an extra valve in field until all nozzle tubes/nozzles have been flushed the Manifold system. This valve is used to choose with clean water.

  • Page 48: Maintenance - Rules Of Thumb

    If any portion remains unclear bar (20 psi). or requires facilities which are not available, then for safety reasons please leave the job to your HARDI 2. Select and use the appropriate protective clothing. dealer’s workshop.

  • Page 49: Cleaning And Maintenance Of Filters

    Maintenance 10. Replace all the filters and nozzles and store the sprayer. If, from previous experiences, it is noted that the solvents in the pesticide are particularly aggressive, store the sprayer with the tank lid open. NOTE! If the sprayer is cleaned with a high pressure cleaner lubrication of the entire machine is recom- mended.

  • Page 50: Lubrication

    Maintenance Lubrica Lubrica tion tion Lubrica Lubrica Lubrication tion tion About lubricants About lubricants About lubricants About lubricants About lubricants Always store lubricants clean, dry and cool - preferably at a constant temperature - to avoid contamination from dirt and condensed water. Keep oil filling jugs, hoppers and grease guns clean, and clean the lubricating points thoroughly before lubricating.

  • Page 51: Lubrication & Oiling Plan

    Maintenance Lubrica Lubrica Lubrica Lubrica Lubrication & oiling plan tion & oiling plan tion & oiling plan tion & oiling plan tion & oiling plan B - 50h - 30g B - 50h - 30g B - 50h - 30g B - 50h - 30g B - 50h - 30g Use this quantity of grease (in gram)
  • Page 52 Maintenance A - 200h A - 200h A - 200h A - 200h A - 200h T201-0001 T202-0008 A - 50h - 40g/50g* A - 50h - 40g/50g* A - 50h - 40g/50g* A - 50h - 40g/50g* A - 50h - 40g/50g* C - 50h C - 50h C - 50h...
  • Page 53 Maintenance (Upside down) Without suspension B - 250 h C - 250 h (Upside down) B - 250 h B - 250 h B - 250 h B - 250 h With suspension C - 250 h C - 250 h C - 250 h B - 50 h B - 250 h...
  • Page 54 Maintenance C - 50h C - 50h C - 50h C - 50h C - 50h B - 50h B - 50h B - 50h B - 50h B - 50h B - 50h B - 50h B - 50h B - 50h B - 50h B - 50h...
  • Page 55 Maintenance SPC only SPC only SPC only (If fitted) SPC only SPC only C - 50h C - 50h C - 50h C - 50h C - 50h C - 500h C - 500h C - 500h C - 500h C - 500h B - 50h B - 50h...

  • Page 56: Service And Maintenance Intervals

    Maintenance vice and Maintenance inter vice and Maintenance interv v v v v als vice and Maintenance inter Service and Maintenance inter vice and Maintenance inter 10 hour 10 hour 10 hours ser s ser s ser s service vice vice vice 10 hour...

  • Page 57: Occasional Maintenance

    Maintenance Occasional maintenance Occasional maintenance Occasional maintenance Occasional maintenance Occasional maintenance Pump valves and diaphragms renewal Cone check/renewal, EVC operating unit Cone check/renewal, EVC distribution valve Wear bush renewal, boom lift Wear bush renewal, drawbar Venting the hydraulic damping system (SELF TRACK) TRACKER damper pressure setting (SELF TRACK) Shock absorbers, inspect Level indicator adjustment...
  • Page 58 Maintenance 4. Nozzle f 4. Nozzle f 4. Nozzle f 4. Nozzle f 4. Nozzle filter ilter ilter ilter ilters s s s s 10 hour 10 hour s ser s ser vice vice 10 hour 10 hours ser 10 hour s ser s service vice...
  • Page 59 Maintenance 5. T 5. T 5. Tyr yr yr yr yre pr 5. T 5. T e pr e pr e pr e pressur essur essur essur essure e e e e 50 hour 50 hours ser 50 hour s ser s ser s service vice...
  • Page 60 Maintenance 100 hour 100 hour s ser s ser vice vice 100 hour 100 hours ser 100 hour s ser s service vice vice 1. Chec 1. Chec 1. Check/adjust dr k/adjust dr k/adjust dra a a a a wbar (F k/adjust dr wbar (F wbar (F...
  • Page 61 Maintenance 3. Br 3. Br 3. Brak 3. Br 3. Br ake adjustment e adjustment e adjustment e adjustment e adjustment 250 hour 250 hours ser 250 hour s ser s service s ser vice vice vice 250 hour 250 hour s ser vice Lift the back of the COMMANDER from the ground.
  • Page 62 Maintenance 4. Air br 4. Air br 4. Air br 4. Air br 4. Air brak ake f e filter ilter ilter ilter ilters (if s (if s (if s (if s (if f f f f fitted) itted) itted) itted) itted) 9.
  • Page 63 Maintenance R R R R R eadjustment of eadjustment of eadjustment of eadjustment of the boom eadjustment of the boom the boom the boom the boom Alignment of centre section and inner section Before adjusting the boom please go through this check 1.
  • Page 64 Maintenance Alignment of inner section and outer Adjusting the front fold cable section The performance of the SPB/SPC boom while spraying depends very much on the front fold cable adjustment. A 1. Unfold the boom and check that the boom wing is correctly adjusted cable will also control the movement aligned.
  • Page 65 Maintenance 5. Loosen jam nuts C on the turnbuckle assembly and Adjusting boom level to ground adjust turnbuckle D for proper cable deflection. Unfold the boom and check that the boom sections are 6. Tighten jam nuts C again and remove weight parrallel to the centre frame and level to the ground.
  • Page 66 Maintenance C. SPB-Z & SPC-Z models If 18-21 m boom: Turn the turnbuckle another 4 complete turns and retighten the jam nuts. 1. Ensure that cylinder is fully extended. 2. Loosen jam nut A. If 24-28 m boom: Turn the turnbuckle another 3 3.
  • Page 67 Maintenance Jaw rubber dampers (SPC only) Inspect basic adjustment of the rubber jaw dampers. Basic adjustment = The compression of the jaw should A A A A A correspond to a distance of 34 mm (+/- 0,5). T103-0011 Measure and adjust the jaw if necessary by means of the two M12 bolts .
  • Page 68 WARNING! If you do not feel totally confident Model 2200/2800 3200/4200 changing wheel bearings or brake shoes contact Max. drum diameter A 302 (11.8897) 402 (15.8388) your HARDI dealers workshop. Min. lining thickness B 2.0 (0.07874) 4.0 (0.15748) GB 14 07 02...
  • Page 69 Maintenance 2. T 2. T 2. T 2. T 2. Tr r r r r ansmission shaft ansmission shaft ansmission shaft ansmission shaft ansmission shaft Change the protection tube nylon bearings as described under “Replacement of transmission shaft protection tubes” in the part Occasional Maintenance. GB 14 07 02...
  • Page 70 Pump model HARDI part No. pressure fluctuations occur, it may be necessary to 750342 renew cone and cylinder. A HARDI kit is available for this 750343 purpose. Ref. no. 741293. Valves 1. Remove 4 x screws A and remove the housing.
  • Page 71 Maintenance Cone c Cone c Cone c Cone c Cone chec heck/r k/rene enew w w w w al, EV al, EV al, EV al, EVC distrib al, EV C distrib C distrib C distrib C distribution ution ution ution ution 6.
  • Page 72 If the shock absorbers loose their efficiency or start leaking oil, they should be replaced. The following venting procedure requires a special venting kit, HARDI ref. no. 720725. 1. Place the trailer on the support leg so that the yoke Lev v v v v el indica...
  • Page 73 Poor seals are usually caused by: 4. Grease bearings. • Missing O-rings or gaskets NOTE! Only use genuine HARDI spare parts to service • Damaged or incorrectly seated O-rings the transmission shaft. • Dry or deformed O-rings or gaskets •...
  • Page 74 Maintenance Adjustment of Adjustment of Adjustment of Adjustment of Adjustment of 3-w 3-wa a a a a y-v y-valv alve e e e e To change a bulb The MANIFOLD valve can be 1. Switch off the light adjusted if it is too tight to oper- 2.
  • Page 75 Maintenance Chang Chang Chang Chang Change of e of e of e of tyr e of tyre e e e e Should it be necessary to replace tyres, it is recom- mended to leave this to a specialist and follow the mentioned rules.

  • Page 76: Off-Season Storage

    When the spraying season is over, you should devote and corrosion. some extra time to the sprayer. 12. Remove the control boxes and the HARDI PILOT If chemical residue is left over in the sprayer for longer control box + display from the tractor, and store them periods, it can reduce the life of the individual compo- dry and clean (in-house).

  • Page 77: Operational Problems

    Fault-finding Oper Oper Opera a a a a tional pr tional pr tional pr lems lems Oper Oper tional pr tional prob oblems lems lems In cases where breakdowns have occurred, the same factors always seem to be in question: 1.

  • Page 78: Liquid System

    Fault-finding Liquid sy Liquid sy Liquid sy Liquid sy Liquid system stem stem stem stem FAULT PROBABLE CAUSE CONTROL/REMEDY No spray from boom when Air leak on suction line. Check if suction filter O-ring is sealing. turned on. Check suction tube and fittings. Check tightness of pump diaphragm and valve covers.

  • Page 79: Hydraulic System

    Fault-finding Hydr dr dr dr draulic sy aulic sy aulic sy aulic sy aulic system stem stem stem stem FAULT PROBABLE CAUSE CONTROL/REMEDY Boom slow/eradic. Air in system Loosen ram connection and activate hydraulics until oil flow has no air in it (not whitish). Regulation valve incorrectly set Open or close until desired speed is achieved (clockwise = less speed).

  • Page 80: Mechanical Problems

    Fault-finding EVC Oper C Oper C Oper C Opera a a a a ting unit C Oper ting unit ting unit ting unit ting unit FAULT PROBABLE CAUSE CONTROL/REMEDY Operating unit not function- Blown fuse(s). Check mechanical function of microswitches. Use cleaning/lubricating agent if the switch does not operate freely.

  • Page 81: Evc Operating Unit

    Emergency operation Emer Emer Emerg g g g g enc y oper y oper y opera a a a a tion of tion of tion of the spr the spra a a a a y y y y y er the spr er er er er...

  • Page 82: Technical Specifications

    Technical specifications T T T T T ec hnical specif hnical specif tions tions echnical specif hnical specif hnical specifica ications tions tions er er er erall dimensions all dimensions all dimensions Over all dimensions all dimensions HÃyˆ†Ã!!!'ÃTQ7ÃÉ ÃTQ HÃyˆ†Ã"!#!ÃTQ7 ÃÉ ÃTQ ‚‚€...
  • Page 83 Technical specifications W W W W W eight, SPB eight, SPB eight, SPB eight, SPB eight, SPB HÃyˆ†Ã"!ÃTQ7 E m pty Full ‚‚€ Ðvq‡u 6‘ yr Ãy‚h q 9…h ih … P Ãr vtu‡ 6‘ yr Ãy‚h q 9…h ih … Uv‡h yÐr vtu‡...
  • Page 84 Please refer to note 1 Note 1: All weights are approximate values and are based on machines equipped with rinsing tank, clean water tank, HARDI FILLER and suspended axle. For SELF TRACK models the values in above tables must be increased:...

  • Page 85: Pump Capacity

    Technical specifications Pump ca Pump ca pacity pacity Pump ca Pump ca Pump capacity pacity pacity Pump 363/10.0 (540 r.p.m.) i t a . n i t i c . x a : e r : t h i t c Pump 363/5.5 (1000 r.p.m.) i t a .

  • Page 86: Filters And Nozzles

    Technical specifications F F F F F ilter ilter ilter ilter ilters and nozzles s and nozzles s and nozzles s and nozzles s and nozzles Conv v v v v er er er er ersion f sion f sion f sion factor sion f actor...

  • Page 87: Electrical Connections For Evc Operating Unit

    Technical specifications Electrical connections f Electrical connections f Electrical connections f Electrical connections f Electrical connections for EV or EV or EV or EV or EVC oper C oper C oper C opera a a a a ting unit C oper ting unit ting unit ting unit...

  • Page 88: Electrical Chart (Evc)

    Technical specifications Electrical c Electrical c Electrical c Electrical c Electrical char hart (EV t (EV t (EV t (EV t (EVC) T192-0038 GB 18 01 02 05...

  • Page 89: Boom Hydraulic Spb-Y, Spc-Y

    Technical specifications Boom hy Boom hy dr dr dr draulic SPB-Y aulic SPB-Y aulic SPB-Y , SPC-Y , SPC-Y Boom hy Boom hy Boom hydr aulic SPB-Y aulic SPB-Y, SPC-Y , SPC-Y , SPC-Y T054-0076 Boom hy Boom hy dr dr dr draulic SPB-Z, SPC-Z aulic SPB-Z, SPC-Z aulic SPB-Z, SPC-Z...

  • Page 90: Installation Instruction For Boom And Work Light

    Technical specifications Installa Installa Installa Installa Installation instr tion instr tion instr tion instr tion instruction f uction f uction f uction f uction for boom and w or boom and w or boom and w or boom and w or boom and wor or or or ork light...

  • Page 91: Electrical Specifications For Boom And Work Light

    Technical specifications Electrical specif Electrical specif Electrical specif Electrical specif Electrical specifica ications f tions f tions f tions f tions for Boom and W or Boom and W or Boom and W or Boom and W or Boom and Wor or or or ork light k light...

  • Page 92: Subject Index

    Green disc ..............34 Brakes ................ 20 Brakes air tank ............58 Breakaway ..............65 Handle ................ 18 By-pass ..............45 HARDI CIRCULATION SYSTEM ........ 46 HARDI FILLER ............40 HARDI-MATIC .............. 7 CaCl ................22 ² Heel bearings ............. 61 Centre rim..............
  • Page 93 Subject Index Rinsing nozzles ............ 42, 47 Rinsing tank ............42, 47 Maintenance ............... 48 Rinsing tank drain valve ..........44 MANIFOLD SYSTEM ..........34 Rubber stop ..............64 Maximum pressure ............. 86 Maximum track width ..........14 Mechanical problems ..........80 Safe sprayers .............
  • Page 94 Subject Index WARNINGS..............5 Wear bush ..............71 Wear rates ..............86 Wheel bearings ............61 Wheel bolts ..............59 Wheel brake cover ............. 29 Wiring ................. 23 Work light ..............28 Working zone ............... 6 Yellow MANIFOLD valve ..........39 Zugmaul ...............

This manual is also suitable for:

Commander plus spb series

Table of Contents