10 Hours Service - InLine Filter
If PrimeFlow is installed in the spray boom, these filters are not included.
If the boom is equipped with In-Line Filters, unscrew the filter bowl to
inspect and clean the filter. When reassembling, the O-ring should be
greased.
Alternative filter meshes are available. See section "Technical
specifications" - Filters and nozzles.
±
WARNING! Be careful not to splash out liquid, when unscrewing
the filter bowl.
±
WARNING! Always wear protective clothing and gloves, before
servicing the filter!
10 Hours Service - Nozzle Filters
The filters are located inside the nozzles.
Check the filter condition and clean the filter.
10 Hours Service - Spraying Circuit
Fill with clean water and operate all functions. Check for leaks using a higher spray pressure than normal. Check nozzle spray
patterns visually using clean water.
10 Hours Service - Brakes
Apply brake pedal and check function of trailer brakes.
10 Hours Service - Air Tank for Brakes
Drain the air tank for condensed water by opening the drain valve.
6 - Maintenance
123