Table of Contents
Advertisement
3 - Description
Liquid System
Pump
Diaphragm pump with 6 diaphragms, model 464.
Standard speed = 540 RPM (6-spline shaft).
Optional speed = 1000 RPM (21-spline shaft).
The design of the diaphragm pump is simple, with accessible
diaphragms and valves, which ensures that liquid does not contact the
vital parts of the pump.
Pump model 464 is shown in the picture.
FlexCapacity Pump
Some sprayers include a dual pump setup with an extra hydraulically
driven pump of the same type as the main pump. The pump is located
behind the side cover on the sprayer's right side.
The FlexCapacity pump is turned on/off with a separate hydraulic lever
in the tractor cabin.
A. FlexCapacity Pump
B. Hydraulic Motor
TurboFiller
The TurboFiller is where you add the chemicals to be mixed with water in the MainTank.
Capacity: approximately 35 litres.
The TurboFiller features are:
A. TurboFiller lid.
B. Container Rinsing Nozzle.
C. TurboFiller Suction Valve.
D. Hopper Scale.
E. TurboFiller Hopper.
F. TurboFiller Cleaning Nozzle.
G. Spray Gun for Rinsing.
H. Handle for Locking TurboFiller in Up or Down Position.
I. Levers for Rinsing and Swirl Functions.
By operating the valve behind (C) and the three levers (I) on the right side of the TurboFiller (E), you can do the following:
• Stir up the added chemicals with water from the sprayer.
• Transfer the mix to the main tank.
• Clean your chemical container or the TurboFiller hopper (E) inside by using the flushing nozzles.
• A spray gun(G) is also available for further cleaning.
48
Advertisement
Table of Contents
