Voltage; Filters; Technical Residue; Airborne Noise Emission - Hardi COMMANDER DELTA FORCE Instruction Book

8 - Technical Specifications

Voltage

The sprayer is designed for the following voltage only:
Voltage 12 V DC
Tolerance for voltage - 1.5 V / + 3.0 V
Blade fuses 25 A *
* The blade fuses usually allow up to 50 A for a few seconds before blowing.
€
DANGER! If the tolerances for voltage are exceeded, the electrical system can fail. Risk of fire. Risk of defect or
malfunctioning components.

Filters

Mesh Gauze width
18 1.00 mm
30 0.58 mm
50 0.30 mm
80 0.18 mm
100 0.15 mm
*depending on selected nozzles
**not with PrimeFlow system

Technical Residue

Worst case technical residue for the sprayer with largest tank, largest fluid system and widest boom is stated below. Narrower
booms and fluid systems with less options will have less residue.
Sprayer combination
Main tank 7000 litres, TERRA FORCE
boom 42 m, FlexCapacity pump and
PrimeFlow.
Main tank 7000 litres, TERRA FORCE
boom 42 m, FlexCapacity pump and 9
boom sections.

Airborne Noise Emission

Airborne noise emission from operating the sprayer relates to the two defined operator positions (in the tractor cab or
operating the chemical incorporator/filling device/TurboFiller). Reference measurements indicate only in the latter case
(operating the chemical filling device) a contribution from the sprayer of additionally 4 dB(A).
164
Color EasyClean
White -
Green Yes
Blue Yes, standard
Red Yes
Yellow -
Dilutable volume
for tank and fluid system
47 litres
47 litres
10.5
Filter
Cyclone In-line**
- -
- -
- Yes*
Yes Yes*
- Yes*
Non-dilutable volume
for spray boom
58.8 litres
69.1 litres
15.0
12
Tank strainer Nozzle
Yes -
- -
- Yes*
- Yes*
- Yes*
Total residual volume
105.8 litres
116.1litres