Operating The Control Unit While Spraying; Night Spraying Light - Hardi COMMANDER DELTA FORCE Instruction Book

Operating the Control Unit While Spraying

The SetBox in the tractor control the following functions in the field:
Power ON/OFF/status, LED light. The light must be ON.
Automatic spray pressure regulation.
The regulation valve controls the main spray pressure. This is
default selection when the controller is powered ON, and it
should remain here during normal spraying.
Manual spray pressure regulation.
During normal spraying, these regulations should not be
used, as the regulation valve does this automatically.
Optional function, A or B.
If extra equipment is fitted, it can be controlled from here.
The SafeTrack function is used, when making turns in the
field.
Press "auto" for automatic adjustment of the sprayer.
Press left or right arrow key to manually adjust the sprayer
.
tracking
For SafeTrack: Press double arrow key to lock the sprayer
tracking (the hydraulics will adjust the sprayer to its centre
position, and a mechanical lock will be activated at the rear).
÷
NOTE! Check the current application rate on the display, or see the instruction book for the spray controller for more
information.

Night Spraying Light

The night spraying light is activated on the controller box in the tractor. Press the A and B switches in the lower left corner.
If traffic light is fitted, the work lights will only work, when the traffic light is on.
5 - Operation
97