Every Week; Every 2 Months; Every 6 Months; Every 12 Months - Fronius FK 6000 Operating Instructions And Spare Parts List

If water-cooled welding torch is used:
-
-
-

Every week

1
2

Every 2 months

1
2

Every 6 months

1
2

Every 12 months

1
2
Applicability of With respect to cooling units, the warranty provisions of the "General Terms of Delivery and
the "General Payment" referred to in the pricelist shall only apply where the following conditions are ful-
Terms of Delivery filled:
and Payment" -
-
-

Disposal

Dispose of in accordance with the applicable national and local regulations.
Check water connections for tightness
Control water return flowrate in coolant container
If there is no water return flow, check cooling unit and purge if necessary
NOTE! If water-cooled welding torches are operated without cooling water, this
mostly causes a defect of the torch body or the hose pack. The manufacturer
does not accept responsibility for any consequential damages. Any warranty
claims expire.
Check the coolant level as well as the coolant purity.
If the coolant level drops below the "min" mark ... refill coolant.
Check the coolant level as well as the coolant purity.
If the coolant level drops below the "min" mark ... refill coolant.
Dismantle machine side panels and clean machine inside with dry reduced com-
pressed air
NOTE! Risk of damage to electronic components. Clean electronic components
from a certain distance only.
Clean also the water coolers in the case of excessive dust
Change the coolant
Dispose of used coolant correctly.
max. 8 operating hours per day (single-shift operation)
only Fronius coolant may be used
the unit is given regular maintenance and the coolant is changed regularly
31