Daikin VAM Series Engineering Data page 87

EDMMT712101
Test conditions are as follows.
Condition
Cooling condition
Heating condition
Notes:
1. Heat exchange efficiency is a value based on JIS B 8628-compliant performance regulations and air conditions.
2. Temperature exchange efficiency and enthalpy exchange efficiency vary depending on the air volume ratio between air supply
and exhaust and air conditions.
3. The operating sound is an anechoic room conversion value that conforms to JIS B 8628, measured 1.5 m directly below the
main unit.
Actually, the value is usually large due to the reflection of ambient noise.
4. The noise at the air outlet will be higher than the displayed value. If you use it in a quiet place, take measures against noise.
5. Current, power, and efficiency are the values at the above airflow rate.
6. The air condition is for a general living room, and it cannot be used in a refrigerator with a large temperature difference even if it
is within the indicated value.
7. Please refer to "installation drawing" for precautions regarding installation.
8. The air volume ratio (supply air volume: exhaust air volume) must be used in the range of 10: 6 to 6: 10.
9. Specifications are subject to change.
VAM-HVE/HVLT Series
Indoor conditions
°CDB °CWB
27 20
20 15
Outdoor conditions
°CDB °CWB
35 31
5 3
Specification
85