Daikin VAM Series Engineering Data page 165

EDMMT712101
15.5.2 Installation Manual
Installation procedure of silencer
1. Remove the flange from
the silencer.
2. Remove the duct
coupling of the air
supply opening
provided on the body
of Heat Reclaim
Ventilator (VAM
series).
3. Use the provided
screws and install the flange on the
Heat Reclaim Ventilator (VAM
series).
4. Install the body of
silencer on the flange.
Then, install the duct
coupling.
VAM-HVE/HVLT Series
Body of
silencer
Flange
Duct
coupling
Heat Reclaim
Ventilator
Air supply side
(VAM series)
of indoor unit
Flange
Flange
Body of
silencer
Details of Optional Accessories
Installation procedure of duct
1. Insert the duct into
the duct coupling and
wind round the
commercially
Aluminum
tape
available aluminum
tape, etc. to prevent
the air leakage.
Duct
JC: 3P107619-1A
163