Daikin VAM Series Engineering Data page 62

Control System
Batch operation [Schedule timer <DST301BA61>]
Purpose • Functions
Weekly schedule management of up to 128 units is possible by batch start/stop.
Central remote controller, etc. can also be combined.
POINT
S etting of group number for centralized control is not required.
I n this system, ventilation mode is selected based on self-judgment.
P ower for schedule timer can be supplied from the printed circuit board of the main unit. ((X18A) in case of commercial multi air
conditioner (multi for buildings); (X11A) in case of Heat Reclaim Ventilator Unit)
Example of control wiring
Power supply
DC16V
X18A
P1 P2
P1 P2
Remote controller
P1 P2
Heat Reclaim
Ventilator Unit
P1 P2
Remote controller
Switch number that needs to be changed for the system
Field settings using remote controller
Centralized zone interlock setting ... "No" [Remains at the factory
default setting]
Essential optional accessory
S chedule timer : DST301BA61
60
Schedule timer
D1
D2
TeS1 F1 F2
F1 F2
P1 P2
Indoor unit
P1 P2
Remote controller
F1 F2
P1 P2
P1 P2
Remote controller
F1 F2
Heat Reclaim
Ventilator Unit
F1 F2
Heat Reclaim
Ventilator Unit
Mode
No.
Centralized zone
17 (27)
interlock setting
Factory default setting
EDMMT712101
Setting
Setting position
switch
01 02
No.
8 No Yes
VAM-HVE/HVLT Series