EDMMT712101
Basic Patterns
System overview
Individual control
Basic example of use
Connected a remote controller to each Heat
Reclaim Ventilator Unit separately to operate
them.
Heat Reclaim Ventilator Unit
Remote controller
█ Remote controller
BRC1H62W(K)
BRC1E63
Start/Stop
Ventilation mode switching (Auto/Heat exchanger/Bypass)
Ventilation rate switching (High/Low)
Timer setting (ON/OFF)
Filter sign display
Abnormal digital display
Control one Heat Reclaim Ventilator Unit with
one remote controller
Total remote controller wiring length: Up to
500m
Cords for each remote controller needs to be
locally procured.
Operation display can be output by
connecting an adapter printed circuit board.
Fresh-up operation by external input is
possible.
※ 1. Follow the installation manual provided for "MAIN/SUB" remote controller setting.
VAM-HVE/HVLT Series
Independent operation system
Control by 2 remote controllers
Perform fine operation of Heat Reclaim Ventilator
Unit and display at hand or at a distance. (Priority
on last command)
Heat Reclaim
Ventilator Unit
Remote controller
█ Remote controller
BRC1H62W(K)
BRC1E63
Remote controller
Control one Heat Reclaim Ventilator Unit with
two remote controllers
Total remote controller wiring length: Up to
500m
Same as individual operation.
"MAIN/SUB" remote controller setting is
required.※ 1
30
Control multiple Heat Reclaim Ventilator Units
simultaneously on a large floor.
Heat Reclaim
Ventilator Unit
Remote controller
Remote controller
█ Remote controller
BRC1H62W(K)
BRC1E63
Control up to 16 Heat Reclaim Ventilator Units
with one remote controller
Total remote controller wiring length: Up to
500m
Control by 2 remote controllers is also possible
Same as individual operation.
Under group control, the same settings apply to
all the Heat Reclaim Ventilator Units connected.
(However, it is also possible to fix settings for
each unit by making individual settings.)
31
Control System
Group control
Heat Reclaim
Heat Reclaim
Ventilator Unit
Ventilator Unit
31
27