ITech IT6000D Series User Manual page 86

– Sweep: Sweep wave
The fields included in the .csv template file are explained as follows:
Model
Firmware
Version
Serial Number
File Type
Waveform Type
Amp Unit
Offset Unit
Time Unit
Frequency Unit
Mode
Repeat
Amp
Offset
Start Frequency
End Frequency
Step DwelH
Step time
Step Repeat
Copyright © Itech Electronic Co., Ltd.
Device model, keep the default settings without
modification.
Firmware version number, keep the default settings
without modification.
Device serial number, keep the default settings with-
out modification.
File type, keep the default settings without
modification.
Waveform type, keep the default settings without
modification.
Peak-to-peak unit, CV priority is set to V, CC priority
is set to A.
Offset value unit, CV priority is set to V, CC priority is
set to A.
Time unit, S.
Frequency unit, Hz.
Indicates the power supply working mode. The CV
priority is set to CV, and the CC priority is set to CC.
Repeat times, the setting range is 1~65535.
Peak-to-peak
Offset value
Start frequency
Stop frequency
Total running time
Single-step pulse width. Single-step pulse width and
single-step repetition times can be set by selecting
one of them.
The number of repetitions of a single step. Single-
step pulse width and single-step repetition times can
be set by selecting one of them.
Power Supply Function
75