ITech IT6000D Series User Manual page 16

Keys Description
[I-set] Set the output current value
[P-set] Set the output power value
[Recall] Returns the instrument to the specified setup.
[Shift] Composite key, combined with other keys to realize functions
marked above keys.
[Esc] Press this key to exit the current operation interface.
[0]-[9] Numeric keys
+/– Positive and negative signs
. Decimal point
Left / Right The left and right navigation keys are used to adjust the cur-
navigation sor to the specified position or scrolls pages to view menu
keys items.
Up / Down The up and down navigation keys are used to scroll page up
navigation and down to view menu items.
keys
[Enter] Operation confirmation key
Copyright © Itech Electronic Co., Ltd.
In CV priority (default) mode, press [V-set], the interface
displays "Vset=0.00V" (Setting value of voltage). In CC
priority mode, press [V-set], the interface displays "Vlim=
0.00V" (Upper limit of voltage), the lower limit of the volt-
age is 0.
In CV priority (default) mode, press [I-set], the interface
displays "Ilim=0.00A" (Upper limit of current) , the lower
limit of the current is 0. In CC priority mode, press [I-set],
the interface displays "Iset=0.00A" (Setting value of
current).
Press [P-set], the interface displays "Plim=0.00W"
(Upper limit of power) , the lower limit of the power is 0.
Quick Reference
5