Table Of Contents; Manufacturer Identification Data; Warranty; Storage - EBARA 1 EPBH 9.2-11 T-AVS Instruction For Installation And Maintenance

CONTENTS
1
DECLARATION OF CONFORMITY
1.1
MANUFACTURER IDENTIFICATION DATA
1.2
WARRANTY
2.
STORAGE
3.
WARNINGS
4.
INSTALLATION
5.
1 EPBH 4 T-I - 1EPBH 5,5 T-I - 1 EPBH 7,5 T-I - 1 EPBH 9,2-11 T-I 1 EPBH 15 T-I
1 EPBH 18,5 T-I - 1 EPBH 22 T-I - 1 EPBH 30 T-I - 1 EPBH 37 T-I - 1 EPBH 45 T-I
5.1
Operation.
5.2
Technical Data
5.3
Connection Diagram References. Characteristics and Interpretations.
5.4
Electrical Connections
6
SPARE PARTS
7
PANEL REFERENCES DRAWING
7.1
Connections and settings for protection against dry running for electric water pumps.
7.2
Connections and settings to empty tanks with a float.
7.3
Connections and settings to empty tanks with TWO electric probes or floats.
7.4
Connections and settings to fill tanks with TWO electric probes or floats.
1.1

MANUFACTURER IDENTIFICATION DATA

Producting company: EBARA PUMPS EUROPE S.p.A.
Factory address:
Street Pacinotti, 32
36040 Brendola (VI) ITALIA
Telefono: 0444/706811
Fax: 0444/706950
TELEX:480536
Web site: www.ebaraeurope.com
1.2

WARRANTY

FAILURE TO COMPLY WITH THE INSTRUCTIONS PROVIDED IN THIS INSTRUCTIONS
HANDBOOK AND/OR ANY SERVICING OF THE ELECTRICAL PANEL WHICH IS NOT
PERFORMED BY OUR SERVICE CENTRES WILL RESULT IN INVALIDATION OF THE
WARRANTY AND WILL RELIEVE THE MANUFACTURER FROM ANY LIABILITY IN THE
EVENT OF PERSONAL INJURIES OR DAMAGE TO PROPERTY OR THE PANEL ITSELF.
2.

STORAGE

It is good practice to provide proper storage in compliance with the following instructions:
The electrical panel must be stored in a perfectly dry location, away from any heat sources.
The electrical panel must be perfectly sealed and isolated from the external environment, in order to prevent
infiltration of moisture and dust which could disrupt its proper operation.
3.

WARNINGS

3.1 Before proceeding with the installation, read these instructions carefully.
The electrical system and connections must be set up by qualified personnel according to the safety regulations in
force in the country where the product is installed, pertaining to the design, installation and maintenance of
technical systems.Failure to comply with the safety regulations will result in the invalidation of all service
coverage under the warranty.
3.2 By qualified personnel we mean those people who, possessing the required training, experience and skills, as well
as knowledge of the pertinent regulations, provisions and prescriptions regarding accident prevention and
operating conditions, have been authorized by the plant safety supervisor to carry out any activity aimed at
preventing safety hazards. (IEC 364 definition for technical personnel)
3.3 Make sure that the panel has not suffered any damage during transportation or storage. In particular, make sure
that the external casing is undamaged and in perfect conditions. In the event of long storage (or replacement of
any of the components) all the tests specified by EN standard 60204-1 should be conducted on the panel.
ENGLISH
Legal adderss
Street Campo Sportivo,30
38023 CLES (TN) ITALIA
Telefono: 0463/660411
Fax:0463/422782
7
page
1
7
7
7
7
8
8
8
9
10
11
11
12
12
13
14
15