Skoda Octavia II 2004 Maintenance Manual page 82

Octavia II 2004 ➤ , Octavia II 2010 ➤
Maintenance - Edition 01.2018
– Raise the fuel filter - top part using an offset screwdriver -VAS
6543- at the assembly groove -arrow A-.
The assembly groove can vary in size depending on the version
of the top part.
– Insert the relevant side of the offset screwdriver -VAS 6543-
in the assembly groove and turn the offset screwdriver.
– Remove the old gasket ring -2- from fuel filter - top part -1-
– Take filter element -3- out of the fuel filter - bottom part.
– Eliminate any dirt present and remaining water from the fuel
filter - bottom part using the diesel extractor, e.g. -VAS 5226- .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
– Remove the old gasket ring -2- from the fuel filter - top part
-1- by levering out the gasket ring in the specified slot
-arrow-.
– Slightly moisten the inner gasket of the filter element with die‐
sel fuel.
– Insert a new filter element in fuel filter - bottom part.
78