Skoda Octavia II 2004 Maintenance Manual page 194

Octavia II 2004 ➤ , Octavia II 2010 ➤
Maintenance - Edition 01.2018
Engine codes
Recommended idling speed (rpm)
Governed speed (rpm)
Soot emission max. opacity value (1/m)
- homologation value
30)
Probe no.
Measurement mode
Measurement time slice
30) The homologation value of soot emission/opacity indicated on the type plate on the B-pillar (also indicated in the vehicle homologation documentation).
31) There are different homologation values for soot emission/opacity for engines with engine identification characters AZV. The homologation value of soot emission/opacity "1.0" is determined with the following
versions of engine control unit
♦ 03G 906 016 EK
♦ 03G 906 016 HG
♦ 03G 906 016 EL
Caution
If the maximum speed achieved by the TDI PD Diesel engines with Diesel particulate filters (engines with the identification characters BLS, BMN and BMS) on a
stationary vehicle at approx. 3000 rpm, this means the clutch guard is active on these engines.
On vehicles with these engines, the "reduced" maximum engine speed (cutoff speed) (with clutch guard) must be used to measure the soot emission .
♦ Engine temperature: above an engine temperature of min. 60 °C, heat the engine to min. 80 °C by accelerating 2 to 10 times freely up to governed speed.
♦ Soot emission max. opacity value: determined in accordance with regulation ECE R24.
Engine codes
Diesel particle filter
PR number
32)
Engine temperature
Recommended idling speed (rpm)
190
AZV AZV
up to 03/2006 as of 03/2006
31)
760 - 960 760 - 960 800 - 1000
4800 - 5200 4600 - 5200 4650 - 5050
1.0 1.2
1 1
B B
0.5 s 0.5 s
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
BLS BMN
x x
7GG 7GG
min. 80 °C min. 80 °C min. 80 °C
800 - 1000 700 - 900 800 - 1000
BXE
1.0
1
B
0.5 s
BMM
x
7GG