Skoda Octavia II 2004 Maintenance Manual page 121

The gearboxes installed as of 01.05 have only one check screw
-B-.
Oil can only be drained and checked via check screw -B-.
– Unscrew check screw -B- close to the pendulum support.
Note
A plastic overflow tube with an 8 mm hexagon socket and a tight‐
ening torque of 3 Nm is located behind this screw. The length of
the overflow tube determines the oil level in the gearbox, when
replacing assign via part number ⇒ Electronic Catalogue of Orig‐
inal Parts .
– Remove overflow tube.
Approx. 5.0 ltr of oil flows out. Furthermore, the catch pan remains
under the gearbox.
– Screw in overflow tube and tighten to 3 Nm.
– Shake the oil reservoir before opening.
Note
The filling hose and adapter -VAS 6262- or -VAS 6262A- must be
clean and gearbox oil must not be mixed with other oils!
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
Maintenance - Edition 01.2018
117
4. Gearbox