Skoda Octavia II 2004 Maintenance Manual page 129

– Use an extraction hose with end part to extract as much brake
fluid as possible from the brake fluid reservoir.
– Set back switch -2- from -vacuum- down.
– Switch off the compressed air distribution, herewith the brake
filling and bleeding device , e.g. -VAS 5234- , is no longer op‐
erative.
Change brake fluid in slave cylinder - vehicles with manual gear‐
box
– Remove engine cover.
– Remove air filter ⇒ Relevant Engine; Rep. gr. 23 or ⇒ Rele‐
vant Engine; Rep. gr. 24 .
– Activate the filling function of the brake filling and bleeding de‐
vice , e.g. -VAS 5234- , as follows:
– Detach connecting hoses -2- and -7- from catch pan -1-.
– Detach the filler hose with quick-action coupling -5- from the
device connection point -6-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
Maintenance - Edition 01.2018
125
5. Chassis