Octavia II 2004 ➤ , Octavia II 2010 ➤
Maintenance - Edition 01.2018
– Unscrew oil filter housing -1- from gearbox.
– Before removing, the oil filter must be slightly inclined.
So that the oil can flow out of the oil filter back into the gearbox.
Note
Always replace O-ring -2-.
– Remove filter -3-.
– Moisten O-ring -2- with gear oil.
– Moisten O-ring in intake collar -arrow- downwards and tighten
the filter housing to 20 Nm.
– Install oil filter housing -1-.
– Install battery tray ⇒ Electrical System; Rep. gr. 27 .
– Install battery ⇒ Electrical System; Rep. gr. 27 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
115
4. Gearbox